On Board Test Panel (Calibration) - Hog Slat GROW-DISC HSCD200 Manual De Instalación Y Operación

GROW-DISK™ Feed System
11. ON BOARD TEST PANEL (CALIBRATION SCREEN):
During the initial installation of the controller, it may be necessary to test the function of all switches
as well as calibrate the amp reading of the chain disk motor. To access this CALIBRATION, go to the
SYSTEM menu and press CHANGE PASSWORD. Follow procedure to change password and input
8321 as the new password. This will not overwrite the set password. Once the password change
has successfully completed, the CALIBRATION SCREEN will be visible.
1. TOGGLE SWITCH: Icon will be show "YES" if the toggle switch in ON. "NO" if the toggle switch
is turn off.
2. PROX SWITCH (Feed Sensor): Since the Proximity switch contact form can be N/O or N/C, the
following table will aid in understanding when the Proximity switch is detecting feed. Table shows
the Icon that will be displayed under the detecting or not detecting feed.
Hog Slat Inc. Newton Grove, NC USA
1
2
3
4
March 2019 REV A5
5
6
24