Zhermack SAND Manual De Instrucciones página 124

STARTING UP
6.5
1
Figure
2
Figure
3
Figure
Failure to observe any of the above equipment installation instructions may lead to
malfunctions and render the warranty null and void.
124 of 176
EN
Fig. 1: After placing the equipment properly on the
worktop (see section 6.3.1) insert the light bulb (19)
in the housing (20) on the inner front wall of the
equipment.
Fig. 2: Connect the lead (12) to the mains power socket:
follow the instructions in section 6.4 carefully.
Fig. 3: Couple the air connection pipe (17) to the
compressed air line and connect it to the air inlet
coupling (15) on the condensation filter unit (16) on the
right-hand side of the equipment.
SAND S 23 / S 24 / S 24 R / S 25 / S 25 R
MAINTENANCE AND USE MANUAL