Routine Maintenance; Unscheduled Maintenance - Zhermack SAND Manual De Instrucciones

ROUTINE MAINTENANCE

8.2
Once the equipment has been cleaned (see section 8.1) the operator must check for worn,
damaged or loose parts. If any such anomalies are discovered contact your Authorised Servicing
Centre.
Should any of the above anomalies be discovered it is strictly forbidden to restart the
equipment before such faults have been set right.
More precisely, should the operator note any defects or problems of any kind whatsoever he/she must
place a warning sign on the equipment indicating that maintenance work is in progress and that using
the equipment is forbidden (EC-compliant signs can be purchased from the relevant suppliers).
Routine maintenance, cleaning and proper equipment use are essential factors in guaranteeing long-
lasting equipment performance and safety.
Equipment safety devices/guards must never be removed except for repair and
maintenance purposes.
Such items must be replaced as soon as the situation which led to their removal no
longer exists and in any case before the equipment is used again.

UNSCHEDULED MAINTENANCE

8.3
Unscheduled maintenance includes repair of any accidental breakage and replacement of worn or
malfunctioning parts.
All electrical and mechanical work must only be carried out by an authorised
Zhermack maintenance technician.
Modifications which alter the equipment characteristics from a safety and risk
prevention viewpoint may only be made by the Manufacturer who shall then
issue a certificate stating that the equipment conforms to safety
standards. Therefore any modification or maintenance tasks not actually
described in this manual are to be considered forbidden. If the equipment is
modified, tampered with or repaired by unauthorised personnel or non-original
spare parts are used the manufacturer is relieved of all responsibility. If a
maintenance task is required but is not described in this manual you must contact
an Authorised Servicing Centre.
132 of 176
MAINTENANCE AND USE MANUAL
EN
SAND S 23 / S 24 / S 24 R / S 25 / S 25 R