Hydration With Automatic Flush - Medline EntraFlo H2O Instrucciones De Operación

QUICK REFERENCE
(HOW TO SET HYDRATION WITH AUTOMATIC FLUSH)
HYDRATION WITH
AUTOMATIC 25 ML FLUSH
Administers water volume with
feeding over a selected time interval
during continuous feeding. The Time
Interval concludes with an automatic
25 mL water flush.
Select Water Volume to be delivered

Hydration with automatic flush

is only recommended when Full
Strength feeding is being delivered.
(If used with diluted feeding, will
result in further dilution of the feed-
ing.)
1. Press SELECT until Feeding
Strength is displayed, and press
, if necessary, to display FS
(Full Strength) feeding delivery.
2. Press SELECT until Set Volume is
displayed.
3. Press or
volume is displayed. Adjustments
can be made in 1 mL increments
from 0–500 mL. Change is more
rapid when the key is pressed
and held.
until desired water
Select Time Interval (in hours) over
which water volume will be deliv-
ered
4. Press SELECT until Time Interval
is displayed.
5. Press or . Time intervals are
adjustable in 1 hour increments
from 2 to 12 hours.
Maximum water delivery is 75 mL
per hour
In the last 5 minutes of the selected
time interval, feeding delivery stops
and the final 25 mL of water is auto-
matically flushed through the line.
Water Volume Delivered resets to 0
after the time interval is completed
and the entire water volume has
been delivered.
MAXIMUM HYDRATION
SETTINGS
Time
Interval (hr)
2
3
4
5
6
7
8
9
10
11
12
DOSE
14
Maximum
Water
Volume (mL)
150
225
300
375
450
500
500
500
500
500
500
500