Feeding Strength; Programmable Flush - Medline EntraFlo H2O Instrucciones De Operación

QUICK REFERENCE
15
(HOW TO SET FEEDING STRENGTH, PROGRAMMABLE
FLUSH, OR RESET WATER VOLUME DELIVERED)

FEEDING STRENGTH

(DILUTION)
1. Press SELECT until Feeding
Strength is displayed.
2. Enter the feeding strength
required by pressing
3. Options are FS (Full Strength-No
feeding dilution), 3 /4, 2 /3, 1 /2,
1 /3, 1 /4 strength, or H
feeding delivery, only water is
delivered).
TO RESET VOLUME
DELIVERED AND/OR
ACCUMULATED VOLUME
Water Volume Delivered is used
to monitor water delivered when
Hydration with Automatic Flush, or
Programmable Flush options are
activated.
1. Press SELECT until Volume
Delivered is displayed.
2. Press RESET.
3. Follow steps 1 and 2, using
the SELECT key to move to
Accumulated Volume, and reset
if desired.
Any time water volume delivered is
reset to 0, feeding volume delivered
is automatically reset to 0. Likewise,
when feeding volume delivered is
reset to 0, water volume delivered is
automatically reset to 0.
Water Accumulated Volume is used
to monitor the total water volume
delivered over multiple time inter-
vals.

PROGRAMMABLE FLUSH

AFTER DOSE IS DELIVERED
A set volume of water for hydra-
tion or flushing that is automatically
administered after the dose limit is
delivered at a rate of 375 mL/hr.
or .
1. Press SELECT until Set Volume is
2 0 (no
2. Press
3. Press SELECT until Time Interval
4. Press
TO DEACTIVATE HYDRATION
AND PROGRAMMABLE FLUSH
(WATER SIDE SETTINGS)
1. At Time Interval, press
2. Reset Feeding Volume Delivered and
displayed.
or . The Water Volume
is adjustable in 1 mL increments
from 0–500. Change is more
rapid when the key is pressed
and held.
is displayed.
until doSE is displayed.
is displayed.
Accumulated Volume. Set Rate and
Dose Limit. Verify feeding strength.
until nOnE