Fire And Explosion Hazard; Electric Shock Hazard - Tritech T7 Manual De Instrucciones

WARNINGS
Below are general warnings related to the use and maintenance, safe grounding and repair of the TriTech airless
paint sprayers. Additional warnings are found throughout this manual where applicable. Symbols appearing in the
manual refer to these warnings. Refer back to these pages for the symbol's description of the specific hazard.

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths
which may present a potential static arc.
• Sprayer generates sparks. When flammable liquid is used in or near the sprayer or for flushing or cleaning,
keep sprayer at least 20 feet (6 m) away from explosive vapors.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
• Ground equipment and conductive objects in work area. Refer to the Grounding instructions.
• If there is static sparking or you feel a shock, stop use immediately. Do not use equipment until you identify
and correct the problem.
• Keep a fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD

Improper grounding, setup, or usage of the system can cause electric shock.
• Turn off unit and unplug power cord before servicing equipment.
• Use only 3-wire extension cords and plug into only grounded electrical outlets.
• Ensure ground prongs are intact on sprayer's power cord and extension cords.
•
CAUTION
:
To reduce the risk of electrical shock, do not expose to rain. Store indoors
WARNINGS AND START UP PROCEEDURE
.