Important Safety Instructions - Tritech T7 Manual De Instrucciones

SKIN INJECTION HAZARD
High-pressure fluid from tip, gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut,
but it is a serious injury that can result in amputation. Get immediate surgical treatment.
• Do not point gun at anyone or at any part of the body.
• Do not put your hand over the spray tip. Use only spray tip specified by TriTech.
• Do not stop or deflect leaks with your hand or body, glove, or rag.
• Engage trigger lock when not spraying.
• Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking or
servicing equipment.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. Read
Technical Data in all equipment manuals. Use only spray tip specified by TriTech.
• Use fluids and solvents that are compatible with equipment wetted parts. Read Technical Data in all equipment
manuals. Read fluid and solvent manufacturer's warnings. For complete information about your material, request
MSDS from your coatings supplier TriLube MSDS are supplied with this unit.
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine TriTech replacement
parts only. Use only spray tip specified by TriTech.
• Do not alter or modify equipment.
• Use equipment only for its intended purpose. Call TriTech customer service or your TriTech distributor for
information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces. If the spray hose is
required to be replaced, replace with identical hose supplied with the sprayer.
• Do not kink or over bend hoses. Do not use the hose as a strength member to pull or lift the equipment.
• Comply with all applicable safety regulations.
• Keep children and animals away from work area.

IMPORTANT SAFETY INSTRUCTIONS