Installation And Start-Up; Standard Features Of The Transaction Team 8500 - HandHeld Transaction Team TT8500 Guía De Arranque

Installation and Startup

Standard Features of the Transaction Team 8500

The Transaction Team 8500 has a long list of standard features, including:
RS-232/RS-485/USB/Ethernet Connectivity
• RS-232, RS-485, USB, and Ethernet are supported by the TT8500. The
system auto-configures to the correct protocol when attached to the
appropriate cable.
LCD Panel
• Pressure-sensitive backlit LCD/Signature panel that displays the
signature using "electronic ink."
Standard Memory
• 16MB to 64MB of SDRAM memory and 4MB to 16MB of Flash memory.
Physical Security
• Opening the device immediately erases all secure information.
Encryption
• PIN Encryption, Master Session key, DUKPT, DES 64 and 128 bit, single
and triple DES.
Compression
• Advanced data compression capability. Standard 5 to 1.
Card Reader
• 3 track Magnetic Stripe Reader (MSR) for use in credit, debit, and
Electronic Benefits Transfer (EBT).
Pass-Through
• Pass-through allows data to be automatically routed from one
communications interface to another, essentially acting as a universal
translator. This allows peripheral devices to be connected to hosts that
do not necessarily support their native communications interface. Pass-
through operations are transparent to both the host and peripheral device.
Introduction
This guide is designed to help guide you through the installation of your
Transaction Team 8500. It covers everything you'll need to know - from
minimum system requirements and package contents, to hardware and software
installation procedures.
Transaction Team™ TT8500 I-1