Setup Menu - HandHeld Transaction Team TT8500 Guía De Arranque

The TT8500 may display a screen titled TT8500 Secure Setup. This is a special
menu used by key loading facilities to load the secure encryption keys used by
the firmware. (See
page E-A-1 for further information.) If you don't want to use the Secure Setup,
touch the Other Setup button. The TT8500 displays the message, " THIS UNIT
IS NOT SETUP!" Touch the pad to enter the regular setup mode.
The TT8500 includes a Test menu within the Setup menu that allows you to test
the various functions of the terminal.
The following charts show the options you can change and functions you can test
using the Setup and Test menus.

Setup Menu

Submenu
TCP/IP
Transaction Team™ TT8500
Apéndice - Carga de la clave de codificación
Description
This displays the TCP/IP Wired Options menu.
Press the Change button to the left of Host IP
Address, Host Port, Default Gateway, TT8500 IP
Address, or Subnet Mask to change any of these
settings. A keypad appears that allows you to enter
the new setting. Press Enter to accept the new set-
ting and return to the TCP/IP Wired Options menu.
The MAC address of the Ethernet interface is dis-
played on the TCP/IP Wired Options menu, but is
factory-assigned and cannot be changed.
When Connect On Startup is checked, the TT8500
connects to the Ethernet host on power up.
The TCP/IP defaults are:
Host IP Address: 192.168.1.200
Host Port: 1010
Default Gateway: DHCP
TT8800 IP Address: DHCP
Subnet Mask: DCHP
MAC Address: 00:10:20:xx:xx:xx
Connect on Startup: Checked
Press Accept or Cancel to return to the main Setup
menu.
beginning on
I-9