C4
D
HEADREST FOR THE ISORAMA AND ISO CHAIRS
D1
D2
SEAT UPHOLSTERY
Position the pad on the seat and secure it with the five M4
screws by tightening the lock nuts, so as to make the
parts join perfectly.
Assembling is easy and intuitive:
Position the headrest. Once the screw heads are placed
in their seats, push down and insert the two dowels in the
respective holes.
Tighten the fastening dowels by pressing onto both parts
and using a 2 mm Allen key.
Proper matching of pad and backrest can be obtained by
loosening the nuts that block the two flathead screws,
adjusting the latter ones in depth so as to accommodate
properly the headrest pad, and then tightening again the
nuts.
32
ABSOLUTE
Installation instructions