I
ARRANGEMENT OF ISOSUN LAMP
The dental unit shall be set according to the type of Isosun lamp installed, i.e. with photo cell or without photo cell.
In order to carry out such programming, act as indicated in the above-mentioned paragraph until the screen shows
.
Press the
key in order to select the proper parameter for the lamp type installed. Using the
increase or decrease the value to set the lamp type:
control for Isosun lamp without photo cell;
control for Isosun lamp with photo cell;
press the enter
key to store this setting.
J
ARRANGEMENT OF ASSISTANT'S KEYBOARD
For setting the electronic system according to the type of assistant's keyboard you should act as indicated in H paragraph
and select the parameter
If the assistant's keyboard is with 2 keys, set
If the assistant's keyboard is with 9 or 19 keys you have to set
For storing the desired setting press the enter key
K
ARRANGEMENT IN CASE OF TUBINGS CLEANING
If the optional tubings cleaning kit is assembled, set the parameter in order to make the electronic device recognize the
installation of the
kit.
Then act as indicated in the H paragraph and select the parameter
If there is no tubings cleaning kit,
If the tubings cleaning kit is present,
To store the chosen setting press the enter key
.
.
.
should be
set.
is set.
.
42
ABSOLUTE
Installation instructions
.
.
and
keys