Keypad Block" Function; Standby - Haverland TTi Manual De Instalacion Y Uso

EN 3. OPERATION
1. Set the radiator on "Standby" mode by pressing the "Standby" button.
2. Press the and
function is activated.
3. To deactivate the function please press again the
A single line will be displayed. Wait a few seconds for the radiator to return to the "Standby" mode. If
you wish to switch on the radiator, press the "standby" button

3.7 "KEYPAD BLOCK" FUNCTION

The keypad may be blocked and unblocked
by simultaneously pressing the
buttons.
The display and the control panel lights
will turn off.
A dot will be displayed on the right
bottom part of the display.
If two dots are displayed it means the key-
board is locked and the unit is on standby
mode. Please unlock the keyboard first.

3.8 STANDBY

To switch the radiator on and off press
ON = 1 beep.
OFF = 2 beeps.
A dot will be displayed on the left part of
the display.
TTi
28
buttons simultaneously, two lines will be displayed indicating that the
and
.
and buttons.
.