English
1
General
About this document
2
Safety
2.1
Indication of instructions in the
operating instructions
Symbols
Signal words
24
Installation and operating instructions
The language of the original operating instructions is German. All
other languages of these instructions are translations of the original
operating instructions.
These installation and operating instructions are an integral part of
the product. They must be kept readily available at the place where
the product is installed. Strict adherence to these instructions is a
precondition for the proper use and correct operation of the product.
These installation and operating instructions correspond to the rele-
vant version of the product and the underlying safety regulations and
standards valid at the time of going to print.
EC declaration of conformity:
A copy of the EC declaration of conformity is a component of these
operating instructions.
If a technical modification is made on the designs named there with-
out our agreement or the declarations made in the installation and
operating instructions on product/personnel safety are not observed,
this declaration loses its validity.
These operating instructions contain basic information which must
be adhered to during installation, operation and maintenance. For this
reason, these operating instructions must without fail be read by the
service technician and the responsible specialist/operator before
installation and commissioning.
It is not only the general safety instructions listed under the main
point "safety" that must be adhered to but also the special safety
instructions with danger symbols included under the following main
points.
General danger symbol
Danger due to electrical voltage
NOTE
DANGER!
Acutely dangerous situation.
Non-observance results in death or the most serious of injuries.
WARNING!
The user can suffer (serious) injuries. "Warning" implies that
(serious) injury to persons is probable if this information is
disregarded.
CAUTION!
There is a danger of damaging the product/unit. "Caution"
implies that damage to the product is likely if this information
is disregarded.
NOTE
Useful information on handling the product. It draws attention to
possible problems.
Salmson 12/2017