System Components - ITT Goulds Pumps AquaBoost II 1AB2 Instalación, Operación Y Mantenimiento

System Compnents
Section 2
Section 2
Please review the AquaBoost II components and insure that you have all the parts and are familiar with their
names. Be sure to inspect all components Goulds Pumps supplies for shipping damage.
AquaBoost II:
1. Pump with Motor
2. AquaBoost II Controller with Integral Pressure Sensor Cable
3. Pressure Tank
4. Pressure Sensor
5. Mounting Kit
6. Tank Tee with Pipe Plug
7. Pressure Gauge
Warning
DO NOT power the unit or run the pump until all electrical and plumbing connections,
WARNING
especially the pressure sensor connection, are completed. The pump should not be run
Hazardous
voltage
dry. All electrical work must be performed by a qualified technician. Always follow the
National Electrical Code (NEC), or the Canadian Electrical Code (CEC) as well as all local,
CAUTION
state and provincial codes. Code questions should be directed to your local electrical
Hazardous
Pressure
inspector. Failure to follow electrical codes and OSHA safety standards may result in
personal injury or equipment damage. Failure to follow manufacturer's installation instructions may
result in electrical shock, fire hazard, personal injury, death, damage to equipment, unsatisfactory
performance and may void manufacturer's warranty.
4