Care And Maintenance - Master Forge 3218LTN Manual De Instrucciones

CARE AND MAINTENANCE

Transformer Connection Instruction
For your safety the 3218LTN grill comes equipped with a UL approved transformer for outdoor
use that provides low voltage to power a 10-watt grill light featured with this model.
Fig. 45
All wiring is factory connected except the easy connection you must make: connect the
factory wire to the transformer with a provided screw-on plastic connector.
Pull the factory wire through the opening in the rear panel, push the wire into the transformer
connector firmly, screw the connector in place and plug the transformer in any household
outlet. (See Fig. 46)
light wire
R
I
Light Wire
Connector
Fig. 46
Replacing Battery for LED Panel Light
1. Open the LED Battery Box on the left panel in the cabinet.
2. Open the Battery Box and replace the battery.
3. When installing new batteries, ensure they are installed
with the proper polarity.
4. Close the cover of the Battery Box.
Lowes.com/masterforge
38