Master Forge 3218LTN Manual De Instrucciones página 42

CARE AND MAINTENANCE
Fig. 51 Air Shutter
CAUTION: If the natural gas conversion kit is used, remember to adjust the air shutter
of main burner (for details, please read the manual of NG conversion).
Replacing the Battery
1. Unscrew the cap on the battery compartment
and remove the old battery.
2. Replace with a new battery and re-install the cap.
Note: The negative (-) side of the battery goes in first.
Please refer to the mark on the side of the cap.
Stainless Steel
3218LTN Stainless Gas Grill is mainly made of stainless steel. Stainless steel is non-rusting in
certain conditions; therefore, a cover and stainless steel cleaner should be used when the grill
is not in use.
Wipe with a stainless steel cleaner on all non-cooking surfaces once a month.
Never clean the stainless steel when it is hot.
After initial grilling, certain areas of the grill (i.e., the vents, hood and burner box) may discolor.
This is a normal discoloration caused by the intense heat from the burners.
Specks of grease can gather on the surface of the stainless steel and get baked on. These
can usually be removed with warm soapy water or a stainless steel cleaner. As a last resort a
mild abrasive pad could be used with a stainless cleaner. Use light pressure on the pad and
always scrub in the direction of the grain.
Do not use steel wool to clean the grill.
Air Shutter
42
(a)
(b)
(c)
Fig. 52 Acceptable Flame (only a)
H
Fig. 53
Lowes.com/masterforge