Service Information - Etac Immedia Swan Manual Del Usuario

Service information

Inspection
Thank you for choosing an Etac product. If the customer
makes adjustments, repairs or uses combinations not
predetermined by Etac, the Etac CE certification and Etac
warranty will not be valid.
Warranty: Two-year warranty on material and manufacturing
defects, provided that the product is used correctly. Before
taking a product into service always conduct a risk assessment
according to national and/or local legislation.
First inspection:
• Is the packaging intact?
• Read the label on the packaging and check the article no.
and product description.
• Check that Short Instruction is enclosed – updated
User Manual/Instruction for use can be downloaded from
www.etac.com or contact Etac Customer Service or your
local distributor.
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Pull hard on the handles in opposite directions
and check the material, seams and stitching.
Test buckles:
Lock the buckle and pull in opposite directions,
check the buckle and the stitching.
Check
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with high or low friction:
If in doubt, please contact Etac Customer Service or local
distributor for more information and guidance.
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
• Check the label on the product - does it include article no.,
product description, lot/batch no., cleaning instructions
and supplier name?
Periodic Inspection:
• Make sure that your Manual transfer system is always in
perfect condition.
• After wash – always check materials, stitching, handles,
buckles.
• If the product shows signs of wear and tear, it must be
removed from service immediately.
Stability test:
Try to bend the product and verify that it feels
firm, stable and solid.
Test low/high friction:
Place the product on a firm surface or a bed,
place your hands on the material and test the fric-
tion by pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/movement
Manual transfer aids for sitting and lying transfer:
The product can be
scrapped in accordance
with national regulations
For more information about training and the use of these
products, contact the Etac transfer experts – www.etac.com.
8
Read the
User Manual