Designated Use - Abicor Binzel MIG ROBO Serie Instructivo De Servicio

MIG/MAG ROBO welding torch
1 Identification
The ready-to-use MIG/MAG welding torch consists of:
• Cable assembly with equipment
• Cable support
• Torch neck, e. g. ROBO 455 with equipment and wear parts.
Together, the components form a fully-functional unit that provides an arc for welding when
supplied with the appropriate consumables. For welding, a wire electrode is fed through the
welding torch system and the arc and the molten pool are protected by the inert gas (MIG) and
the active gas (MAG). The wire electrode is a consumable solid or fluxed-core wire fed through
the contact tip. The contact tip transfers the welding current to the wire electrode. The arc is
formed between the wire electrode and the workpiece.
.
1
1 Torch neck
2 Cable support
Fig. 1 Product overview
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.
BAL.0046 • 2019-02-07
2
3 Nameplate
3 4
4 Cable assembly with equipment
1 Identification
EN - 3