sylvac S Dial Work Analog Nano Smart Modo De Empleo página 11

6.2 Use of the buttons
It is also possible to enter or modify the nominal value or the tolerance limits by prolongedly pressing (>2s) the
Enter the
or button :
nominal rating
+
(see chap. 7)
Note :
- It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
- If no tolerance limits have been defined by the user, the instrument will only display the tolerance limit indicators but will
not turn on the indicator lights (red - green - yellow).
- In case of measuring internal ratings, you can cross the indicators (red and yellow) by reversing the order of entering the
tolerance intervals (upper interval < lower interval).
and :
mm
MODE
OK
mm
TOL
Enter the
lower interval
mm
MODE
mm
TOL
(see chap. 7)
11
a n d /
Enter the
upper interval
mm
MODE
mm
TOL
(see chap. 7)
E