Sirona Dental Systems GmbH
60 82 023 D3297
D3297.201.01.11.02
Exposure with Bite Block or Contact Segment
without Chin Support
•
With programs P1, P10, P14 and P15, move the
forehead support to the 00.0 position by actuating
the ← key.
For the forehead support setting for the other programs
refer to the "Exposure Programs" chapter.
•
Have the patient stand in front of the mirror.
. . . with Bite Block
Using the ↑ and ↓ buttons, adjust unit height so that
•
the bite block and the anterior teeth match up.
•
Have the patient grip the handles.
•
Have the patient bite the bite block at the indenta-
tion.
The upper anterior teeth should be directly in the in-
dentation, and the lower anterior teeth should be
moved forward up to the stop.
. . . with Contact Segment
For patients without anterior teeth
•
Adjust the unit height so that contact segment and
subnasals match up.
•
The contact segment should be just under the pa-
tient's nose.
Ensure that the upper and lower jaws are lined
up with each other.
This is facilitated by a cotton roll.
•
Ensure that the spine is slightly tilted as described
before.
6 Operating
31