Releasing The Exposure - Sirona ORTHOPHOS Plus Instrucciones De Uso

Sirona Dental Systems GmbH
6.4

Releasing the Exposure

P I
69
I5
60 82 023 D3297
D3297.201.01.11.02
A
Observe the radiation protection guidelines explained on
page 8.
i
NOTE
The Help LEDs on the bottom of Control Panel A must all
be extinguished and the Ready LED may no longer be
flashing!
• The exposure is released by keeping depressed the
release button.
The rotation movement is running automatically in
accordance with the exposure program selected.
For P6 and P7 program only
The rotary unit moves back into the starting position after
having completed the program parts P6.1 (P7.1).
Then have the patient open his mouth and release the
program part P6.2 (P7.2).
During radiation, the radiation indicator X-ray lights up.
The radiation duration is additionally accompanied by an
acoustic signal.
• The exposure ends when the LED over button R
blinks.
Rotation and radiation automatically switch off.
• Open the temple supports and have the patient step
out.
During the exposure
The program number (e. g. P1) is indicated at the Multi-
timer.
After the end of the exposure
After finishing the exposure the really needed exposure
time is indicated.
• After the exposure
Acknowledge the indication of the time actually re-
quired for the exposure by pressing the Return (R)
button.
• Then press the R button again to bring the rotary unit
to its initial position.
After return travel and after loading the cassette with a
new film the unit is automatically ready for another expo-
sure.
CAUTION
During the cassette change, the cassette holder must by
all means be swung in up to the stop before the cassette
finally engages.
If no further exposures are to be made turn unit OFF.
6 Operating
37