D) Personalizing A Programme - CefarCompex Mi-Theta 600 Manual Del Usuario

D) Personalizing a programme

Not all programmes have an option
screen.
not connected
In certain programmes, you will need
to choose the muscle group you want to
stimulate when there are no
cables connected to the stimulator. The
target area is shown in black on the
figure above channel 1.
8a 8b 8c
8a: Press the On/Off button to return to
the previous screen.
8b: Use the channel 1 +/- button to
choose the desired treatment area. You
can choose among 7 areas.
8c: Press the channel 2 +/- button to
delete the warming-up sequence and to
choose if you want to combine with any
of the 2+2 programs on channel 3 and 4.
8d: Use the channel 3 +/- button to
choose the programme difficulty level.
8e: Use the channel 4 +/- button to
confirm your choices and launch the
programme.
connected
The stimulator will automatically select
the muscle group to be stimulated when
a cable is connected to the
unit.
Reminder: The
activate automatically in programmes
that accommodate this function when at
least one cable is connected
to the stimulator.
9a 9b 9c
Session duration
(in min.)
8d 8e
function will
9d 9e
9a: Press the On/Off button to return to
the previous screen.
9b: NOTE: Only available in MiTheta
600. Use the channel 1 +/- button to
enable the function. When
the function is enabled, the screen will
display the word ON or OFF. When in ON
mode, it is the patient who triggers the
stimulation. Reminder: Not all motor
nerve stimulation programmes use the
function. If the
function is not available, there will be
no symbol above channel 1.
9c: Press the channel 2 + button to de-
lete the warming-up sequence. Press the
channel 2 - button to choose if you want
to combine with any of the 2+2 programs
on channel 3 and 4.
NOTE: When the 2+2 function is ena-
bled, the cannot be activated
and the corresponding symbol will disap-
pear automatically from the screen.
Use the channel 2 + button to delete the
default warm-up period.
warm-up sequence
no warm-up sequence
9d: Use the channel 3 +/- button to
choose the programme difficulty level.
9e: Use the channel 4 +/- button to
confirm your choices and launch the
programme.
Preliminary test
This test is launched only if a cable
fitted with the
ready connected to the stimulator when
this is turned on!
It is essential that the patient remains
completely still and relaxed during the
entire test.
If the cable is connected,
the test will begin as soon as you choose
and personalise your programme.
NOTE: The test is not launched if you
choose a programme that does not
require the pre-selection of a muscle
group.
system is al-
ENG
17