Stimulation Mode - CefarCompex Mi-Theta 600 Manual Del Usuario

Select NMES or TENS
ENG
Select the stimulation form
In order to personalize the parameters:
17a
17a: Press the On/Off button to return
to the previous screen
17b: Use the channel 1 +/- button to
move the cursor between the different
settings
17c: Use the channel 2 +/- button to
increase or decrease the setting values
17d: Use the channel 3 +/- button to
show further parameters possible to
adjust
17e: Use the channel 4 +/- button to
save the program
Saving programme
18a: Press the On/Off button to return
to the previous screen
18a
18b: Use the channel 1 +/- button to
move the cursor in the program name
18c: Use the channel 2 +/- button to
write letters and figures
20
17b 17c 17d 17e
18b 18c 18d 18e
18d: Use the channel 3 +/- button to
maximize or minimize the space
18e: Use the channel 4 +/- button to
save the program
NOTE: You can save maximum 10 custom
programs.
NOTE: Also the custom programs are
possible to combine with a program from
the 2+2 list by adding and selecting the
2+2 option. When you save this program
will consist of one program on channel
1+2 (P1) and one program for channel
3+4 (P2) (Please see section "Choosing
the 2+2 function".)
G) Stimulation mode
19a 19b 19c
19 b c d e: The different energies
reached during the contraction phase
are shown by a series of black bar
graphs. Active rest phase energies are
shown by hatched bar graphs.
NOTE: Active rest phase stimulation
energies are automatically set at 50%
of contraction intensities but can be
modified during the rest phase. Once
modified, they will be totally independ-
ent of the contraction intensities.
Pause mode
19a: Press the On/Off button to inter-
rupt the programme momentarily. To
restart it, simply press the channel 4 +/–
button (19e). The session will resume at
80% of the energy levels that were being
used prior to the interruption.
NOTE: If your MiTheta 600/Theta 500
emits a beeping sound and the + symbols
under the active channels begin to flash,
the stimulator is suggesting you to in-
crease the level of the stimulation ener-
gies. If you are working at the patient's
maximum tolerance level, simply ignore
this message.
19d 19e