E) Choosing The 2+2 Function; F) Programming Mode - CefarCompex Mi-Theta 600 Manual Del Usuario

E) Choosing the 2+2 function

You now have the possibility to choose
the 2+2 function which means that you
can choose one program for the channel
1 and 2, then select one program from
the 2+2 program list for channel 3 and 4.
This means that you could treat two
different body parts at the same time or
combine two different programs on the
same body part.
12a 12b 12c
12a: Press the On/Off button to return
to the previous screen.
12b: Use the channel 1 +/- button to
choose the desired treatment area, You
can choose from 7 areas.
12c: Press the channel 2 + to delete the
warming up sequence, by pressing the
channel 2 – the 2+2 mode is selected and
the first program in the list is displayed.
Press the channel 2 – again in order to
display the next program in the list.
12d: Use the channel 3 +/- button to
choose the program difficulty level
12e: Use the channel 4 +/- button to
confirm your choices and launch the
program.
NOTE: The timer for ch 1+2 will control
the total session time. This means that
the total time for ch 3+4 could not ex-
ceed the session time for ch 1+2.
NOTE: The program for ch 3+4 is always
in one phase
NOTE: If a preset program uses more
than two channels, it's not avalable for
the 2+2 mode.
12d 12e
The horizontal bars on top of the display
shows the total duration and different
phases of the programs. Left bar for P1
and right bar for P2
P1 shows the program chosen for
channel 1 and 2
P2 shows the program chosen for
channel 3 and 4

F) Programming mode

In the programming mode you could
create a custom program and select your
own parameters. Then name your pro-
gram and save it in the custom programs
category.
Go to the programming category.
ENG
19