Tabla De Contenido - Riello RS 34/1 MZ Instrucciones De Instalación, Funcionamiento Y Mantenimiento

GB INDEX
TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Structural versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Burner description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Packaging - Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Max dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Burner equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Firing rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Test boiler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Commercial boilers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Gas pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Boiler plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Blast tube length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Fixing the burner to the boiler. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Combustion head setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Gas feeding line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Gas train. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjustment before first firing. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Burner start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Burner firing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Burner calibration: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1 - Maximum output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 - Air pressure switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 - Minimum gas pressure switch. . . . . . . . . . . . . . . . . . . . . . . . 13
Flame presence check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Burner operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Final checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Burner start-up cycle diagnostics . . . . . . . . . . . . . . . . . . . . . . . . 16
Reset of the control box and using diagnostics . . . . . . . . . . . . . 16
Fault - Probable cause - Suggested remedy . . . . . . . . . . . . . . . 17
Normal operation / flame detection time. . . . . . . . . . . . . . . . . . . 18
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Electrical panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
N.B.
Figures mentioned in the text are identified as follows:
1)(A) = Part. 1 of figure A, same page as text;
1)(A)p.3 = Part .1 of figure A, page number 3.
INFORMATION ABOUT THE INSTRUCTION
MANUAL
INTRODUCTION
The instruction manual supplied with the burner:
- is an integral and essential part of the product and must not be
separated from it; it must therefore be kept carefully for any nec-
essary consultation and must accompany the burner even if it is
transferred to another owner or user, or to another system. If the
manual is lost or damaged, another copy must be requested from
the Technical Assistance Service
- is designed for use by qualified personnel;
- offers important indications and instructions relating to the instal-
lation safety, start-up, use and maintenance of the burner.
DELIVERY OF THE SYSTEM AND THE INSTRUCTION
MANUAL
When the system is delivered, it is important that:
- The instruction manual is supplied to the user by the system
manufacturer, with the recommendation to keep it in the room
where the heat generator is to be installed.
- The instruction manual shows:
- the serial number of the burner;
..................................................................................
- the address and telephone number of the nearest Assistance
Centre;
..................................................................................
..................................................................................
..................................................................................
- The system supplier carefully informs the user about:
- the use of the system,
- any further tests that may be necessary before the system is
started up,
- maintenance and the need to have the system checked at
least once a year by the manufacturer or another specialised
technician.
To ensure a periodic check,
ing up of a Maintenance Contract.
1
of the area;
recommends the draw-