Publicidad
Idiomas disponibles
Idiomas disponibles
SERVICE AND ADJUSTMENT
HOW TO REMOVE
THE MOWER
HOUSING
1.
Move the attachment
clutch
to the DISENGAGE
position.
2.
Move the lift lever
to the level adjustment
position
(Figure
30).
3.
4.
5.
6.
7.
8.
9.
NOTE:
Make sure the lift lever
is
locked
in
the
LEVEL
ADJUSTMENT
position.
Remove
the hair pins and the
washers
from the rear suspen-
sion
arms
(Figure
31). See
il-
lustrations
"C" and "D".
Level Adjustment
Remove
the hair pins and wash-
Position
Figure 30
ers from the suspension
links.
See illustrations
"A" and "B".
Disconnect
the extension
spring
from the blade
control
rod.
See illustration
"E".
Disconnect
the front
hanger
from
the frame
support.
See
illustration
"F'.
Remove
the mower
drive
belt
from
the stack
pulley.
See
illustration
"G".
Pull the mower
housing
away from the right side of the unit.
To operate
without
the mower housing,
move the lift lever to the
TOP position.
HOW TO INSTALL
THE MOWER
HOUSING
1.
Push the mower
housing
under the right side of the unit.
2.
Put the mower
drive
belt around the stack
pulley.
Make sure
the "V" side of the mower
drive
belt is against the stack
pulley.
Also, make
sure the mower
drive
belt is not twisted.
3.
Attach
the front
hanger
to the frame
support
with the hanger
rod.
Fasten
with the fasteners
as shown.
See illustration
"F".
4.
Make sure the mower
drive
belt
is between
the stack
pulley
and the two belt guides.
See illustration
"G".
5.
Attach
the suspension
links
to the lifter
assembly.
Fasten
with the washers
and hair pins. See illustrations
"A" and "B".
6.
Attach
the rear suspension
arms
to the suspension
brackets.
Fasten
with the washers
and hair pins. See illustrations
"C" and
"D".
7.
Attach
the extension
spring
to the blade
control
rod.
See
illustration
"E".
8.
Move the attachment
clutch
to the ENGAGE
position.
Make
sure the mower
drive
belt
is inside all the belt guides
and is
also below
the spacer
tube.
9.
Make sure the mower
housing
is level. See the instructions
on
"How To Level The Mower
Housing".
10. Check
the operation
of theattachment
clutch.
See the instruc-
tions on "How To Adjust
The Attachment
Clutch".
Lift Lever
Attachment_
Clutch
3acer Tube
G
BeltGuide
Stack Pulley
,j
Adjuster
Arm
D'
Lifter
Assembly
Adjuster
Arm
Mower
Drive Belt
Front Hanger
Hanger Rod
Suspension_Link
E_Exterlsion
Spring
Figure 31
F-O40603L
28
Publicidad
