Festo MPS Manual Del Usuario página 75

11.
12.
13.
© Festo Didactic 8062973
The first folding cylinder for the dust flaps is
advanced manually in order to check for correct
functioning.
The flap cylinder is then moved manually to its
bottom end position. It has to be assured that
this cylinder doesn't squeeze the box together,
but rather only presses gently.
This position can be adjusted at the front of the
sheet metal bracket with the help of the two
oblong holes.
The same procedure applies to the second
folding/flap cylinder on the other side.
Both of the box's dust flaps are now closed.
Packaging station
75