14. Coffee dispensing
Preliminary operations
Unhook filter holder and empty the coffee grounds of the previous coffee in
the dregs drawer.
Fill the filter with one dose of ground coffee in the case of the 1-cup filterholder
with conical filter or with two doses of ground coffee in the case of a 2-cup
filterholder with cylindrical filter.
Uniformly press the ground coffee in the filter holder by means of the pressing
disc of the grinder.
Clean the filter rim in order to eliminate the eventual ground coffee.
Hook filterholder to the group and put one or two cups underneath of the
delivery spouts of filter holder.
1
Press the coffee dispensing key
corresponding to the preferred dose.
The LED corresponding to the selected
key will remain lit.
4
When the dose set is reached,
dispensing will stop automatically.
Before returning to the standby phase,
the display will show the following
parameters for a few seconds: total
dispensing duration and duration of
pre-infusion phase.
2
The pre-infusion phase starts, represented
on the display for the group with the
symbol
with the relative duration.
T h e
b a r
the progress of the entire dispensing
operation.
5
Press key
for continuous
dispensing.
Dispensing, whether for dosed servings
or continuous, can be interrupted at any
time by pressing the key
other dosing key.
14 EN
Do not remove the coffee
filter before the coffee
dispensing has completed.
3
At the end of pre-infusion dispensing
begins, represented by the symbol
and the relative duration.
b e l o w
indicates
or any