While Operating - Troy-Bilt TBBV Manual Del Operador

• Prevent disconnection of the blower/vacuum powerhead
from extension cord during operation by using a plug-
receptacle retaining strap, connector, or by making a knot as
shown below:
Extension Blower/Vacuum
Cord Cord
• Avoid dangerous environments. Never operate your unit in
damp or wet conditions. Moisture is a shock hazard.
• Do not use the unit in the rain. Do not use in or around water.
• Do not handle the plug or unit with wet hands or standing on
any wet surfaces.
• Do not leave the unit plugged in when not in use, changing
attachments or add-ons, or while being serviced.

WHILE OPERATING

• Keep bystanders, especially children and pets, at least 50 ft
(15 m) away.
• Wear safety glasses or goggles that are marked as meeting
ANSI Z87.1 standards, and ear/hearing protection when
operating this unit. Wear a face or dust mask if the operation
is dusty.
• Wear heavy, long pants, boots, gloves and a long sleeve
shirt. Do not wear loose clothing, jewelry, short pants,
sandals or go barefoot. Secure hair above shoulder level.
• Use the unit only in daylight or good artificial light.
• Use the right tool. Only use this tool for the purpose
intended.
• Keep air intake opening clear of debris while blowing.
• Avoid situations that could catch the vacuum bag on fire. Do
not operate near an open flame. Do not vacuum warm ash
from fireplaces, barbecue pits, brush piles, etc. Do not
vacuum discarded cigars or cigarettes.
• Never operate the unit without the vacuum tube and vacuum
bag or blower tube installed.
• Never attempt to clear a clogged vacuum or blower tube with
the engine/motor running.
• Never operate the unit with a damaged bag. Bags are subject
to deteriorate during use. Check the bag for damage and
replace when necessary. A damaged bag may let objects
pass through, causing injury.
• Always make sure the bag is completely zipped prior to
starting the unit.
• Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.
• Do not overreach, take extra care when working on steep
slopes or inclines. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a
firm grip on both the front and rear handle or grips.
• Keep hands, face, and feet at a distance from all moving
parts. Do not touch or try to stop the impeller when it is
rotating. Do not operate without guards in place.
4
RULES FOR SAFE OPERATION
Extension Blower/Vacuum
Cord Cord
• Do not put any object into openings. Do not use with any
opening blocked; keep free of dirt, debris, and anything that
may reduce the air flow.
• Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high speed
when not in use.
• Always stop the engine/motor when operation is delayed or
when walking from one location to another.
• If you strike or become entangled with a foreign object, stop
the engine/motor immediately and check for damage. Have
any damage repaired before attempting further operations.
• Stop the unit IMMEDIATELY if you feel excessive vibration.
Vibration is a sign of trouble. Inspect thoroughly for loose
nuts, bolts or damage before continuing. Repair or replace
affected parts as necessary.
• Stop and switch the unit to off for maintenance, repair, or for
changing add-ons or other attachments. The unit must be
stopped and the impeller no longer turning to avoid injury.
• Use only genuine factory replacement parts and accessories
for this unit. These are available from your authorized service
dealer. Use of any unauthorized parts or accessories could
lead to serious injury to the user or damage to the unit, and
void your warranty.
OTHER SAFETY WARNINGS
• Allow the unit to cool before storing or transporting. Be sure
to secure the unit while transporting.
• Store the unit in a locked up and dry or high and dry place to
prevent unauthorized use or damage, out of the reach of
children.
• Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean unit and
labels with a damp sponge. Clean after each use.
• Keep these instructions. Refer to them often and use them to
instruct other users. If you loan someone this unit, also loan
them these instructions.
• Only qualified personnel should perform any repairs or
maintenance procedures that are not described in this
manual.
• Check shear bolts, engine mounting bolts and other bolts at
frequent intervals for proper tightness to be sure the
equipment is in safe working condition.
• Inside a building store the machine away from ignition
sources. Allow the engine to cool before storing in any
enclosure.
• Always refer to the Operator's Manual instructions for
important details if the unit is to be stored for an extended
period.
• Do not attempt to repair the machine unless you have the
proper tools, and instructions for disassembly and repair of
the machine.
SAVE THESE INSTRUCTIONS