Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
I_1 ON-SCREEN
DISPLAY
•
The ADV-700 is equipped
wkh an on-screen
display ("OSD")
function
that displays various types of information
on the surround
functions
and the disc on the screen when the function
is set to DVD.
(_) Setup screen
•
This is used to select the speaker system being used (quick system
setting) and to change the function
of the ADV-700 and
various settings
when playing discs (system
setting
change and DVD setting
change).
•
The setup screen can be used regardless
of the currently
set function,
but it cannot be operated
while a disc is playing.
Set
the stop mode first.
(_) Display of disc information
•
When the function
is set to DVD, the OSD displays information
on the disc and appears when various
playback
functions
are operated.
(_) Display of surround
function
•
When the function
is set to DVD, information
on the surround
amplifier
is also displayed
and can be operated.
•
The OSD for the surround
function
(AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information
cannot be set to "OFF".)
Set to "ON"
upon shipment
from the factory.
Set to "ON"
upon shipment
from the factory.
000@
® _
®
®,®_ Q,_(3-
12
m2
ml
With the function
set to DVD,
the STATUS button
press
for at least 2 seconds.
•
"AV OSD ON _1:1_ OFF" is displayed.
STATUS
%
Remote control unit
Remote control unit
The current
setting
is displayed
in green.
2
Turn the AV OSD on or off.
FUNCTEON
/SELECT
Main unit
Remote
control
unit
After
several seconds,
the display turns off and the setting
is made.
NOTES:
•
Depending
on the disc being played, the picture may be
disturbed
when
the
OSD turns
on.
This
is not
a
malfunction.
If this should
happen, set the AV OSD to "OFF".
•
The
OSD
is also
output
to the
VCR
video
output
terminals.
Do
not
perform
setup
or
OSD
operations
while
recording
with a video deck.
I_1 USING THE ON-SCREEN
DISPLAY
•
Use this function
to display and change
information
on the
disc (titles, chapters,
time, etc.)
11
_000
i1o,®' ®
m3
Before operating
the
remote
control unit!
•
Be sure to set the
DVD mode using
the remote
control
mode selector
buttons.
1
In the play mode, press the DISPLAY button.
•
The On-Screen
Display appears.
•
The picture on the TV screen switches
each time the
button is pressed.
•
The items displayed
differ from disc to disc.
Example:
For DVDs
• Normal
playback
screen
D_SPLAY
(_'_
Remote control unit
Example:
For video and music CDs
• Normal playback screen
2
3
• Disc information
screen
• Disc information
screen
Disc information
screen
SINGLE
RE_IN
03:r7
TOTAL
ELAPSED
06:15
TOTAL
REMAIN
32:05
For the on-screen
display
for video CDs and music
CDs, only the disc time changes.
Use the and
/_.
, V
cursor buttons
to select the item you wish to
change.
•
The selected
item is displayed
with a yellow frame.
(_)
For DVDs
"TITLE",
"CHAPTER",
"TITLE ELAPSED"
can be selected.
(_)
For video and music CDs
"TRACK"
can be selected.
Remote
control
unit
@
@
Changing the elapsed time
input using the number buttons,
then press the ENTER button.
Example:
For 1 minute 26 seconds
-- "00126"
Changing the title, track or chapter
•
For DVDs
input using the number buttons,
then press the ENTER button.
(For some discs it is not possible
to change the title or chapter.)
•
For video and music CDs
input using the number buttons.
Playback starts from that track.
©C)q}
(Z)
G
©®@
@@
Remote control unit
31
Publicidad
Capítulos
Tabla de contenido
