Iso Din Radio Provision With Pocket - Metra 99-5816 Instrucciones De Instalación

ISO DIN radio provision with pocket

1. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
2. Secure the ISO brackets to the
radio using the screws supplied
with the radio. (Figure A)
3. Slide the radio into the radio
housing trim panel until it snaps
into place. (Figure B)
4. Snap the ISO trim plate onto the
front of the radio housing trim
panel. (Figure B)
5. Snap the pocket into the radio
housing trim panel. (Figure C)
6.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio and climate controls. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Re-
connect the negative battery terminal
and test the radio for proper operation.
7. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
(Figure B)
99-5816
(Figure C)
6