Kit Assembly - Metra 95-7328 Instrucciones De Instalación

ISO DDIN radio provision
1. Snap the ISO DDIN brackets to the
outside edge of the ISO DDIN trim
panel. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it using
the screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the radio. Metra recommends using
the proper mating adapters from
Metra and/or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
4. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
95-7328
(Figure B)
3