Festo DGC-8 Serie Instrucciones De Utilizacion página 25

DGC-8/12
v [m/s]
DGC-12-...
aG
aF
aF DGC-12-G with elastomer absorbers
aG DGC-12-G with shock absorb. type YSR
aH DGC-12-G with shock absorber type
YSRW
Maximum slide speed values as a factor of the distance of the
Fig. 22 and Fig. 23:
centre of gravity r
Close the one-way flow control valves
S
– at first completely,
– then loosen them one turn.
If there has been a conversion from lubricated to non-lubricated compressed air:
Please note
There will be an increase in wear as the service life lubrication has been washed
out.
S The DGC-... must be completely lubricated again (permitted greases see
chapter 8).
Festo DGC-8/12 0212NH English
aH
aI
m [kg]
aI DGC-12-KF with elastomer absorbers
bJ DGC-12-KF with shock abs. type YSR
bA DGC-12-KF with shock absorber type
YSRW
and the work load m at 6 bar, 20 degrees centigrade.
0
r = 35 mm
0
bJ
bA
Fig. 24
25