Festo DGC-8 Serie Instrucciones De Utilizacion página 27

DGC-8/12
Please note
S Fit the shock absorbers or the
elastomer absorbers together
only with the stop sleeve (H)
and the locking nut (K).
The DGC-... may be damaged if
it is operated without the stop
sleeve and locking nut.
7 Operation
Make sure that
S
– nobody can place his/her hand in the
positioning range of the DGC-... (e.g.
by providing a protective screen).
– there are no objects in its path.
It should not be possible to touch the
DGC-... until it has come to a complete
stand.
8 Care and maintenance
Clean the band system if required with a soft cloth.
S
The following cleaning agents are permitted: all non-abrasive media.
Excessive friction or the use of grease-solvent cleaning agents (e.g. soap suds)
will impair the service life lubrication.
Grease the surfaces of the guide rail and band system in accordance with the
S
following table:
Festo DGC-8/12 0212NH English
K
d
Fig. 27
M: Direction of impact of the work load
H: Stop sleeve
K: Locking nut
Fig. 28
H
2 Nm
M
27