Grohe F-digital 36 294 Manual De Instalación página 6

Digital controller selection menu , see fold-out page III, Fig. [11].
F1 - Automatic filling/safety shut-off
Button Description
Start the selection menu (only if there is no water flowing)
- Select by pressing and holding the - / + buttons simultaneously.
• Start F1 - Automatic filling/safety shut-off.
=> Confirm selection by simultaneously pressing the - / + buttons.
Changing the point of discharge by turning the digital controler ring-
not for 36 294/36 351
=> Confirm selection by simultaneously pressing the - / + buttons.
- Stop the water flow/timer by turning the ring anti-clockwise.
- Continue water flow/timer by turning the ring clockwise.
- Stop the water flow/timer again by turning the ring anti-clockwise.
- Pressing the - / + buttons simultaneously saves the quantity/
duration and exits the menu.
Abort the menu by pressing and holding the Start/Stop button or
after 30 minutes (water stops) plus 3 minutes whithout triggering.
F2 - Calibration
Button Description
Start the selection menu (only if there is no water flowing)
- Select by pressing and holding the - / + buttons simultaneously.
- Select F2 by turning the ring.
• Start F2 - Calibration
=> Confirm selection by simultaneously pressing the - / + buttons
(Select point of discharge with largest possible flow rate).
Changing the point of discharge by turning the digital controler ring-
not for 36 294/36 351
=> Confirm selection by simultaneously pressing the - / + buttons.
- Turn ring and set minimum flow rate.
=> Confirm selection by simultaneously pressing the - / + buttons.
- Turn ring and set maximum flow rate.
=> Confirm selection by simultaneously pressing the - / + buttons.
- Turn ring, measure water outlet temperature and set at 100 °F.
=> Confirm 100 °F by by simultaneously pressing the - / + buttons.
Settings are saved and exits the menu.
Abort the menu by pressing and holding the Start/Stop button or
after 3 minutes whithout triggering.
F3 - Register/de-register additional digital controllers/diverters
Button Description
Start the selection menu (only if there is no water flowing)
- Select by pressing and holding the - / + buttons simultaneously.
- Select F3 by turning the ring.
• Start F3 - Register additional digital controllers/diverters
=> Confirm selection by simultaneously pressing the - / + buttons.
- Press the buttons 1 + 3 simultaneously of all controllers/diverters
which should be registered except the main controller.
- Pressing the - / + buttons simultaneously on the main digital
controller saves the selection and exits the menu.
• Start F3 - De-register additional digital controllers/diverters
=> Confirm selection by simultaneously pressing the - / + buttons.
- Pressing the - / + buttons simultaneously on the main digital
controller to de-register all existing controllers/diverters except the
main controller.
Abort the menu by pressing and holding the Start/Stop button or
after 3 minutes whithout triggering.
3
English
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes green 1x and water
flow started.
Water flow changes.
Illuminated ring flashes green 1x and water
timer started.
Water flow stops/timer stops.
Water flow starts/timer continues.
Water flow stops/timer stops.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes red 2x.
Illuminated ring flashes green 1x and water
flow is started.
Point of discharge changes.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.
Visualization
Illuminated ring flashes red 1x.
Illuminated ring flashes red 3x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes green 1x.
Illuminated ring flashes green 3x.
Illuminated ring flashes violet 1x.