Changing The Water In The Boiler; Cup-Warmer (Where Contemplated) - La Cimbali M39 Dosatron TE Manual De Uso E Instalación

Before operating the machine change the
water in the boiler."
Ensure that the indication on the display corresponds to
the working pressure value.
Keep a hot water distributor key (12) pressed down for
approximately 5 seconds.
The following message will be displayed: "WATER
CHANGE". The water from the boiler will drain from the
hot water nozzle (8) (60 - 70% ca. of the total capacity).
The boiler resistance and all dispensing keys will be disabled.
Dispensing will stop automatically (Note. The delivery can
be interrupted in whichever moment by means of the push
button STOP 35).
After the procedure, the machine will return to its normal
CAUTION: do not put any cloth on the cup-
warmer.
The machines have a cup warmer tray (23) for stocking
and pre-heating the cups.
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on
the tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (23) press
button (22); to change the cup-warmer power, press the
(22) key a number of times.
- All LEDS on = full power
- All LEDS off = OFF
To desactivated the heating of tray (23) press more times
the key (22) until all the leds are off.
N.B. The heating of the cup warmer tray (23) is
deactivated during the automatic switch off
phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine
automatically switches on.

11. Changing the water in the boiler

12. Cup-Warmer (where contemplated)

12 EN
12 35 12 12
8
23
22