Blade Assembly; Light Kit Assembly (Optional). Pgs - Craftmade ELLINGTON PD52ABZ5C4 Guia De Instalacion

9. Blade Assembly.

Time Saver: Washers for blade screws can be set
on each blade screw prior to installing blades.
Locate 15 blade attachment screws and washers
in hardware pack. Hold blade arm up to blade and
align holes. Insert 3 blade attachment screws
(along with washers) with fingers first and then
tighten screws securely with a Phillips screwdriver.
Repeat for the remaining blades.
Remove blade arm screws and lock washers from
underside of motor. If plastic motor locks are installed
with blade arm screws, discard
(save blade arm screws and lock washers to secure
blade arms). Align blade arm holes with motor
screw holes and attach blade arm with screws and
lock washers. Before securing screws permanently,
repeat this procedure with remaining blade arms.
Securely tighten all screws.
Note: Tighten blade arm screws twice a year.
10. Light Kit Assembly (Optional).
If you wish to use your fan WITHOUT a light kit:
Remove 3 screws from switch housing cap. Be sure
that wire connectors are secure and then tape each
wire connector separately with electrical tape. Align
holes in switch housing cap with holes in switch
housing. Use screws that were just removed to
attach switch housing cap to switch housing.
Please proceed to Section 11 on the following page
to complete installation without light kit.
If you wish to use your fan WITH a light kit:
Remove 3 screws from light kit fitter.
Locate BLACK (or BLUE) and WHITE wires in the
switch housing labeled FOR LIGHT. Remove and
discard plastic that hold these 2 wires together.
Remove wire connectors from the same 2 wires as
well--save wire connectors for later use.
Next, locate WHITE and BLACK (or BLUE) wires in
light kit fitter labeled FOR LIGHT KIT CONNECTION.
["Light Kit Assembly" continued on next page.].
plastic motor blocks
page 7
screws and washers
plastic
motor
block
lock washers
blade arm
screws
motor housing
switch
housing
white wire
switch housing cap
white wire
motor housing
blade attachment
blade
blade arm
black wire
black wire
light kit
fitter