Craftmade KNE48 Guia De Instalacion página 8

8. Blade Assembly.
WARNING: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades. If screws are
overtightened, blades may crack and
break.
Locate 9 blade attachment
screw/washers in hardware pack. Slide
blade through one of the narrow,
rectangular openings on motor housing,
aligning holes in blade with holes in
blade arm (located on the underside of
the motor housing)--refer to drawing at
right. Insert 3 blade attachment
screws/washers with fingers first and
then tighten screws securely with a
Phillips screwdriver. Repeat procedure
for each remaining blade.
Note: Tighten blade attachment screws
twice a year.
page 8
motor housing
blade
blade attachment
screws/washers