INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Retains the factory personalization menu and climate controls status
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains the factory backup camera
• Retains balance
• Micro "B" USB updatable
INTERFACE COMPONENTS
• Axxess interface (built into the touchscreen display)
• 5840 harness
• HVAC interface
• HVAC interface harness
• 16-pin harness with stripped leads
• 54-pin backup camera harness
• 4-pin harness with yellow RCA jacks
• Female 3.5mm connector with stripped leads
AXXESS INTERFACE INSTALLATION
TABLE OF CONTENTS
Connections . ..............................................................................................................................8-9
Installation .................................................................................................................................. 10
Programming . ..............................................................................................................................11
Final assembly .............................................................................................................................11
Troubleshooting . ......................................................................................................................... 15
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Small flat-blade screwdriver• Tape • Wire cutter• Zip ties
REV. 8/27/2018 INST99-5840CH
7