Troubleshooting - Bond BHDIY-003 Manual De Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

TO EXTINGUISH

1. Push and turn burner control knob clockwise to the "PILOT" position. (Normally,

burner will make a slight popping sound when extinguished). Main burner will

extinguish but Pilot flame will remain ON.

2. To extinguish Pilot flame, depress Control Knob and continue to turn it clockwise to

OFF.

3. Close the LP tank valve.

4. Disconnect the regulator from the LP tank to close the gas supply when not in use.

5. Make sure that the unit is completely cooled before touching any of the components or

putting on the cover.

ROUTINE CARE

 Keep your appliance free and clear from combustible materials.

 Visually inspect burner for obstructions, keep tank enclosure free and clear from

debris.

 After the burner and lava rocks are completely cooled down, use a soft brush to get rid

of the mild stains, loose dirt and soil. Wipe with a soft cloth.

STUBBORN STAINS

 Stubborn stains, discoloration and possibly rust pitting can occur from exposure to

harsh outdoor conditions.

 Be careful not let any powder or solvent come in contact with painted or plastic

components as damage may occur.

MAINTENANCE

 Store the appliance in a cool dry place away from direct sunlight.

 Make sure both the gas and the appliance are turned off before changing battery.

Please refer to the process of inserting battery.

 Protect your appliance with the cover when not in use.

 The propane cylinder must be disconnected and stored outdoors before the

appliance can be stored indoors.

 Use Manufacturer approved or supplied replacement parts and accessories only.

Otherwise may void the warranty of this product and result in a hazardous condition.

 Please contact the Manufacturer for information regarding replacement hoses,

thermocouples, igniters, lava rocks, etc.