Axxess ASWC-1 Manual De Instalación página 15

Section 3: Troubleshooting
3) Release the "Volume Down" and the LED will go "Off". We are now
in radio programming mode.
4) Press and release the "Volume Up" button for the desired radio
number (please refer to the ASWC-1 legend). For each press the
red LED. It will go "On" and then "Off" when released for feedback.
5) When the desired radio type has been reached, Press the
"Volume Down" button.
6) The LED will go on and will remain on (approximately 3 seconds).
The ASWC-1 is internally computing and storing this new
information.
7) The LED will go "Off" indicating it is completed.
Note: If at any time the user fails to press any button for a period
of 10 seconds or more, this programing mode will abort.
15