Section 4: Remapping; Remapping Swc Buttons - Axxess ASWC-1 Manual De Instalación

Section 4: Remapping

Remapping the SWC (Steering Wheel Control) Buttons
Once you have the ASWC-1 programmed you can then change the
steering wheel control button assignment(s). Such as, programing the
"Seek Up" button as a "Mute" function. Follow the steps below to
remap the SWC buttons:
1) Ideally have the ASWC-1 visible, so you can see the LED flashes to
confirm button recognition.
2) Turning "Off" the radio is recommended.
3) Within the first 20 seconds of turning the ignition on, press and hold
down the "Volume Up" button for at least 20 seconds.
4) The LED will light up solid red. Release "Volume Up" and the LED
will go out. "Volume Up" has now been programmed.
5) Follow the list in the Button Assignment section, page 19,
to reference the order of what buttons need to be pressed and/or
how to bypass a button.
6) After the last button is programmed on your steering wheel (you
do not have to go through the whole list), hold down the "Volume
Up" button for at least 10 seconds then the LED will go out.
After the 18th button is programmed or skipped the LED will go out and
the remapping is completed.
--- Or ---
16