Cleaning - Silk’n VACUPEDI Manual Del Usurario

7 Cleaning

EN
NOTICE! RISK OF DAMAGE!
• Do not use any aggressive cleaners,
brushes with metal bristles, or sharp or
metallic cleaning utensils such as knives,
hard scrapers, and the like.
Clean the product after each use.
1. Remove the attached grinding disc
product. If necessary, use the handle of the cleaning
brush
2. Turn the fixing ring
from the product (see Fig. D).
3. Remove the filter
Fig. D).
4. Clean these parts accordingly:
Main body: Wipe it off with a damp cloth. Then wipe
it completely dry with a dry cloth.
Dust chamber and grinding discs: Use the
cleaning brush to remove the dust accumulated on
them.
Filter, fixing ring and cover
under running water. Wipe the fixing ring and cover
completely dry with a dry cloth and let the filter air dry
thoroughly.
Replace the filter if it is too dusty and the grinding disc
if it is worn out.
5. Reassemble the filter, fixing ring, grinding disc and cover
after cleaning. Please note, that all parts need to be
completely dry before reassembling.
15
to aid the removal (see step 1 in Fig. B).
13
5
6
counterclockwise to detach it
from the dust chamber
3
from the
4
(see
10
: Clean them