Safety And Responsibility; Transport And Storage - Georg Fischer EA11 Manual Instrucciones

Accessories for electrical actuators
 These documents are available via the agency of GF Piping Systems or at
www.gfps.com.

3 Safety and responsibility

 Only use product as intended, see intended use.
 Do not use any damaged or faulty product. Throw out any damaged product
immediately.
 Regularly check the safety installations in the compressed air supply of the plant
on their proper functioning.
 Have product and accessories only operated by persons, who have the necessary
training, knowledge or experience.
 Regularly train personnel on all questions pertaining to the locally accepted
regulations on occupational safety and environmental protection, especially on
pressure-retaining pipelines.
 Make sure that personnel know, understand and follow the instruction manual and
the instructions contained therein.
 Have product and accessories only operated by persons, who have the necessary
training, knowledge or experience.
 Instruct personnel regularly in all relevant matters of the locally applicable
regulations on occupational health and safety – especially those for electrical
devices.
 Be familiar with and observe the instruction manual and the details contained
within.
 Observe the instruction manual of the hand operated valve. They are an integral
component of this manual.
 Take precautions against electrostatic hazards.
CAUTION
Malfunction of the product!
Electrostatic discharge can damage the components.
 Do not touch the board itself.

4 Transport and storage

 Transport and/or store product in unopened original packaging.
 Protect product from dust, heat and moisture.
 Ensure that the product has not been damaged neither by mechanical nor thermal
influences.
 Check product before assembly for transport damage.
Safety and responsibility
53