Georg Fischer EA11 Manual Instrucciones página 66

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Position signalization
Accessories for electrical actuators
For new learning run 360 °:
 Disconnect the actuator from the valve, to avoid damage to the valve.
 Before doing the learning run, set the jumper so it connects the two pins.
 Perform the learning run.
 Put the jumper into the original position.
 Mount the actuator.
9
Fig. 11
If the position signalization is combined with the monitoring print,
the output signal 4 – 20 mA can be processed on the terminals (18 and 19) 9 on the
board of the monitoring print. (4 mA > CLOSED / 20 mA > OPEN).
If the position signalization is connected to the positioner,
the positioner will process the signal.
66

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ea21Ea31Ea42

Tabla de contenido