Jacuzzi MN35959 Manual De Usuario página 18

Tabla de contenido

Publicidad

Operating Instructions
Operating Instructions
Note: When the power is plugged in initially, nozzles for feminine/bidet wash and posterior/cleansing wash will each
come out in turn.
Initial Operation
• Preparation
– Open the shutoff valve and check for any water leaking or dripping.
– Plug the power cord into the outlet
– Press "Bidet" or "Cleansing." The water tank will be fi lled with water in 2 minutes. After the water tank is fi lled, a
long buzzer will sound.
• Check all functions
– Cover the toilet bowl with plastic wrap. Check all functions described in this manual.
CAUTION
– Dropping the remote control in water may cause it to malfunction.
– Functions (except "Cleaning") are operational when the seat is occupied.
– Before operating, be sure that the water tank is completely fi lled.
Cleansing
– Press "Cleansing" for posterior wash. Function will stop automatically in 60 seconds.
– Press button again to activate oscillation. The nozzle will move back and forth automatically to widen
cleansing area.
– Press button again to stop oscillation wash.
Bidet
– Press "Bidet" for feminine wash. Function will stop automatically in 60 seconds.
– Press button again to activate oscillation. The nozzle will move back and forth automatically to widen
cleansing area.
– Press button again to stop oscillation wash.
Dryer
– Press "Dry" after "Cleansing" or "Bidet." Warm air will be emitted for 3 minutes.
– Press button again to alter the strength of air drying.
Adjusting Water pressure/Dry temperature
– Adjust water spray pressure by pressing up or down arrows to 5 levels.
– Adjust drying temperature by pressing up down arrows to 5 levels.
– Both will default to level 3 after each use.
Stop
– Press "Stop" to stop current operation.
– When a user stands up, all operations will stop automatically.
Kids
– Press "Kids" to change all functions to be suitable for children: 1 minute for oscillation, 3 minutes for
drying, level 1 water pressure, and level 5 of nozzle position.
– This unit should be used under the supervision of an adult.
Auto (with lower fl ap in closed position)
– Press "Kids/Auto" button two times to activate the automatic functions.
– The Auto feature is done consecutively with "Wash –> Oscillation –> Pulsation –> Dry –> Stop" for 4
minutes.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido