Rods And Tools; Machine Assembly; Instructions For Installing Handle And Throttle Cable; Instructions For Engine - RIDGID Kollmann K-1000 Manual Del Operador

K-1000 Rodder
Rods
Catalog Model
No. No. Description
60355 A-2474 3' Solid Sectional Rod, includes R-1 Male and
R-2 Female Couplings
60360 A-2475 5' Solid Sectional Rod, includes R-1 Male and
R-2 Female Couplings
60365 A-2476 10' Solid Sectional Rod, includes R-1 Male and
R-2 Female Couplings
Tools and Replacement Blades
Catalog Model
No. No. Description
62045 T-300 Spear Head
62050 T-301 Round Stock Corkscrew, 1
62055 T-302 Round Stock Corkscrew, 2"
62060 T-303 Round Stock Corkscrew, 2
62065 T-304 Round Stock Corkscrew, 3"
62070 T-305 Round Stock Corkscrew, 3
62075 T-306 Double Corkscrew, 3"
62080 T-307 Double Corkscrew, 4"
62085 T-308 Double Corkscrew, 5"
62090 T-309 Square Stock Corkscrew, 3"
62095 T-310 Square Stock Corkscrew, 4"
62100 T-311 Square Stock Corkscrew, 5"
62105 T-312 Square Stock Corkscrew, 6"
62370 T-313 Square Stock Corkscrew, 8"
62375 T-314 Square Stock Corkscrew, 10"
62380 T-315 Square Stock Corkscrew, 12"
62110 T-316 Auger, 3"
62115 T-317 Auger, 4"
62120 T-318 Auger, 5"
62125 T-319 Auger, 6"
62385 T-320 Auger, 8"
62390 T-321 Auger, 10"
62140 T-326 Pick-Up Tool
The following Heavy-duty Cable Tools are also
recommended for use with rod.
Catalog Model
No. No. Description
61800 T-2 Heavy-Duty Straight Auger
61790 T-4 Heavy-Duty Funnel Auger
63200 T-7 Hook Auger
61960 T-16 Spiral Bar Cutter, 4"
61850 T-17 Spiral Bar Cutter, 6"
61855 T-18 Spiral Bar Cutter, 8"
63085 T-23 Spiral Sawtooth Cutter, 4"
59765 T-24 4-Blade Cutter, 2
59770 T-25 4-Blade Cutter, 3
59775 T-26 4-Blade Cutter, 4
59780 T-26A 4-Blade Cutter, 5
4
"
1 /
2
"
1 /
2
"
1 /
2
Replacement
Blade(s)
—
—
—
97855
97955
97960
97850
"
1 / 97940
2
"
1 / 97975
2
"
1 / 97805
2
"
/ 97980
1
2
Ridge Tool Company

Machine Assembly

WARNING
To prevent serious injury, proper assembly of the
K-1000 Rodder is required. The following proce-
dures should be followed:
Instructions for Installing Handle and
Throttle Cable
1. Insert handle assembly into handle openings in
base and attach by means of four
vided (Figure 1).
2. Attach free end of throttle cable to throttle handle
and secure cable to left side of handle with two cable
clamps provided.
Throttle Cable Handle
and Stop Nut
Throttle Cable
Shift Lever
Rod Holder
Figure 1

Instructions for Engine

1. Engine is shipped without oil. Fill with oil prior to start-
ing engine (See enclosed Engine Owner's Manual for
details).
Failure to fill engine with oil will result in en-
CAUTION
gine failure.
Instructions for Assembling Rods and
Tools
1. To connect rods, align and snap the couplings to-
gether for a solid connection (Figure 2).
" bolts pro-
3 /
8
Handle
Assembly