Additional Information - Nice Neoplus Serie Instrucciones Y Advertencias Para La Instalación Y El Uso

5) Additional information

In addition to the ERGO, PLANO, NICEWAY and VOLO S RADIO series transmitters, the NEOPLUS motors also recognise other transmitters produced by Nice (see
chapter 5.1 "Available transmitters").
A particular command can also be associated to each transmitter button by means of a specific memorization procedure (see chapter 5.2 "Transmitter programming
in Mode I and Mode II").
5.1) Available transmitters
Table A6 indicates the transmitters that can be used with the related coding.
Table "A6"
Coding type
FLOR Rolling code
SMILO Rolling code
FLO Fixed code
Because the coding of the transmitters is different and the motor is unable to
recognise them at the same time, the first transmitter memorized determines the
type of coding in use and therefore the type of transmitters that can be memorized
afterwards.
If it is necessary to change the type of transmitter after the first transmitter has been
memorized, all transmitters must be cancelled (see tables "A5" or "A10").
5.2) Memorization of the transmitters in Mode I and Mode II
Tables "A1" and "A4" describe the memorization of the transmitters in "Mode I" where a specific command is assigned to each button: button s (1) = "Up"; button ■ (2)
= "Stop"; button t‚ (3) = "Down".
The transmitters can also be memorized on "Mode II", which allows greater flexibility in the use of the transmitter buttons. Transmitters can be memorized both in Mode I
and Mode II on the same NEOPLUS motor.
5.2.1) Mode I
The command associated to the transmitter buttons is fixed in Mode I: button s (1) "Up"; button ■ (2) "Stop";
button t‚ (3) "Down", another button 4 commands the "Stop".
A single memorization phase is performed in Mode I for each transmitter and a single section is occupied in
the memory. It is not important which button is pushed when memorizing in Mode I.
See tables A1 and A4 to memorize or cancel the transmitters.
5.2.2) Mode II
One of the four possible commands can be associated to each of the transmitter buttons in Mode II: 1 = Step-
by-Step; 2 = Up-Stop; 3 = Down-Stop, 4 = Stop.
A memorization phase is performed for each button in Mode II, and each occupies a section of the memory.
The button pushed is memorized during memorization in Mode II. A new memorization is necessary if one
wishes to assign another command to another button of the same transmitter.
5.2.3) Example of Mode I and Mode II combined memorization
Group commands can be created taking opportune advantage of the Mode I and Mode II memorizations as shown in the diagram.
• The T1 transmitter (Ergo1) memorized in Mode I on A1 and A2 simultaneously
commands the Up, Stop or Down of both A1 and A2.
• The T2 transmitter (Plano1) memorized in Mode I on A3 only, commands the Up,
Stop or Down of A3 only.
• The T3 transmitter (Planotime) memorized in Mode 1 on A4 only, commands the
Up, Stop or Down of A4 only.
• The T4 transmitter (WM001C) memorized in Mode II (Step-by-Step) commands
A4 only.
• The T5 transmitter (WM003G) memorized in Mode I to command A1 and A2 with
group 1, A3 with group 2 and A4 with group 3; commands the Up, Stop or Down
of A1 and A2, A3 or A4.
• The T6 transmitter (Flo4R) memorized in Mode II on A4 (buttons 1 and 3) on A5
(button 2) and on A6 (button 4), commands the Up and Down of A4, or the open-
ing of the garage door A5 or the opening of the automatic gate A6.
WARNING:
• Some functions (movement direction, operating time...) cannot be programmed
with the transmitter memorized in Mode II if different buttons need to be pushed
in this programming phase, such as button ■ and button s for example.
• The "multiple group" commands cannot be used with a transmitter memorized
in Mode II.
5
Transmitters
ERGO1 - ERGO4 - ERGO6
PLANO1 - PLANO4 - PLANO6 - PLANO TIME
VOLO S RADIO
NICEWAY (the entire line)
FLO1R - FLO2R - FLO4R
VERY VR
SM2 - SM4
FLO1 - FLO2 - FLO4
VERY VE
ERGO PLANO
FLO4R VERY
By counting the number of beeps when the motor is switched on, it is possible to
verify the type of memorized transmitters.
Type of memorized transmitters
1 short beep Transmitters with FLO coding
2 short beeps Transmitters with FLOR coding
3 short beeps Transmitters with SMILO coding
2 long beeps No transmitter memorized
Mode I
Button
Button s or 1
Button ■ or 2
Button t or 3
Button 4
Mode II
N° Command
1 Step-by-Step (Up-Stop-Down-Stop...),
2 Up-Stop (Up-Stop-Up-Stop...)
3 Down-Stop (Down-Stop-Down-Stop...)
4 Stop
NICEWAY VOLO S RADIO
SM4 SM2
Command
Up
Stop
Down
Stop