Before you
call for service
49-80822 Rev. 1
Problem
Possible Cause
Why is my
Your range has been designed to
range making a
maintain a tighter control over your
"clicking" noise
oven's temperature. You may hear
when using my
your oven's heating elements "click"
oven?
on and off more frequently than in
older ovens to achieve better results
during baking, broiling, convection, and
self-clean cycles.
Clock and timer
A fuse in your home may be blown or
do not work
the circuit breaker tripped.
Oven display sleep is turned on or
clock setting is turned off.
Oven light does
Light bulb is broken or defective.
not work
Pad operating light is broken.
Oven will not
The temperature is too high to set a
self-clean
self-clean operation.
Oven controls improperly set.
Excessive
Excessive soil or grease.
smoking during
clean cycle
Excessive
Food too close to burner element.
smoking during
broiling
Oven door will
Oven too hot.
not open after a
clean cycle
Oven not clean
Oven controls improperly set.
after a clean
Oven was heavily soiled.
cycle
The self-clean cycle has been selected
"DOOR "
but the door is not closed.
flashes in the
display
"DOOR " will flash while the oven
door is locking to start self-clean and
steam clean.
The oven door is locked because
"DOOR " light
the temperature inside the oven
is on when you
has not dropped below the locking
want to cook
temperature.
"F— and a
You have a function error code.
number or
letter" flash in
the display
If the function code repeats.
Troubleshooting Tips
Wall Oven
What To Do
This is normal.
Replace the fuse or reset the circuit
breaker.
See the Special Features section.
Call for service.
Call for service.
Allow the oven to cool and reset the
controls.
See the Cleaning the Oven section.
Turn both knobs to OFF. Open the
windows to rid the room of smoke. Wait
until the LOCKED light goes off. Wipe up
the excess soil and reset the clean cycle.
Lower the rack position of the food.
Allow the oven to cool below locking
temperature.
See the Cleaning the Oven section.
Clean up heavy spillovers before starting
the clean cycle. Heavily soiled ovens may
need to self-clean again or for a longer
period of time.
Close the oven door. Wait for oven door to
finish locking.
This is normal.
Allow the oven to cool.
Press the mini knob. Allow the oven to
cool for one hour. Put the oven back into
operation.
Disconnect all power to the oven for at
least 30 seconds and then reconnect
power. If the function error code repeats,
call for service.
23