Certificate Of Conformity - Rosenbauer HEROS Información Para El Usuario

engl. 8.4.04_NEU 31.10.2007
The manufacturer
hereby declares that the new fire helmets listed below
Art. No.: 156600, 1566142, 156623, 156618, 156614, 156621, 156628, 156605, 156629
Fire helmets of the series
Art. No.: 156630, 1566144, 156637, 156638, 156635, 156636, 156639, 156641 conform
to the specifications required by the PSA safety regulations, Federal Gazette No. 596/1994
and thus to PSA Directive 89/686/EEC as amended from time to time, and that the
following standards were applied:
protection" (protection against high-velocity parts)
The fire helmets meet the PSA standards that were the subject of the design test
certificates issued by the Deutsche Montan Technologie GmbH certification authority
(registered by the European Commission under Ref. No. 0158) and to which the quality
assurance for the end product (Art. 14) applies under the control of the registered
certification authority Deutsche Montan Technologie GmbH, Postfach 130101, D-45291
ESSEN.
Hans Detzlhofer
Division Manager
9:11 Uhr Seite 28

CERTIFICATE OF CONFORMITY

ROSENBAUER INTERNATIONAL AKTIENGESELLSCHAFT
Paschingerstr. 90
A-4060 LEONDING, Austria
Fire helmets of the series
HEROS Colour EN 443/1997
HEROS GFK EN 443/1997
pursuant to Appendix 1,
Certificate No. 3737 A/99/120 PSA
HEROS II Colour EN 443/1997
HEROS GFK without edge protection EN 443/1997
pursuant to Appendix 1,
Certificate No. 2342 A/98/56 PSA
- DIN EN 443/1997 "Fire helmets"
- Section 7.2.2 of EN 166 (1995 edition) "Personal eye
- HEROS helmets meet the specifications of the flame
resistance test for face shields in accordance with Guideline 11.50-
01d, Section 7.2.3 Protective helmets for firefighters (2nd draft) –
Switzerland (Test Report No. 414579) and comply with Council
Directive 96/98/EC (marine equipment) SOLAS 74/88
Chapter II-2, Approval No. 221.001 and 221.002.
Dieter Weiand
Product Manager
28 No. 04/00, Edition 05/2003